• The Elevators with API8C standard
• DDZ series elevators are center latch elevators with 18 degree taper shoulder,
applied in handling the drill pipes and drilling tools, etc
• The loads range from 100 tons to 750 tons and the sizes range from 2-3/8” to 6-5/8”
Model |
Rated Cap(ST) |
Size Range(in) |
|
"G"SERIES |
MG |
100 |
2.3/8"~5" |
RG |
150 |
2.3/8"~5.1/2" |
|
MGG |
250 |
2.3/8"~5.1/2" |
|
GG |
350 |
3.1/2"~5.7/8" |
|
HGG |
500 |
3.1/2"~6.5/8" |
|
HGG |
750 |
4"~6.5/8" |
• The Elevators with API8C standard
• Model TA center latch elevators with square shoulder are suitable for handling drill pipe, drill collars, casing and tubings
Model |
Rated Cap(ST) |
Size Range(in) |
|
"A"SERIES |
TA |
35 |
1.05"~2.7/8" |
65 |
1.66"~2.7/8" |
||
100 |
2.3/8"~5" |
||
125 |
2.3/8"~4.1/2" |
||
150 |
4.1/2"~10.3/4" |
• The Elevators with API8C standard
• Model SX side door elevators with square shoulder are suitable for handling casings in oil drilling, natural gas drilling and well construction
Model |
Rated Cap(ST) |
Size Range(in) |
|
"X"SERIES |
SX |
350-500 |
7"~20" |
• The Elevators with API8C standard
• Model SLX side door elevators with square shoulder are suitable for handling tubings, casings, drill pipes and drill collars in oil drilling
Model |
Rated Cap(ST) |
Size Range(in) |
|
"X"SERIES |
SLX |
65 |
3.1/2"~14.1/4" |
100 |
2.3/8"~5.3/4" |
||
150 |
5.1/2"~13.5/8" |
||
250 |
5.1/2"~30" |
||
350 |
4.1/2"~14" |
• The Elevators with API8C standard
• The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation
Model |
Rated Cap(ST) |
Size Range(in) |
|
"Y"SERIES |
MYT |
40 |
1.315"~2.7/8" |
YT |
75 |
1.315"~3.1/2" |
|
YC |
75 |
3.1/2"~7" |
|
MYC |
125 |
3.1/2"~7" |
|
HYT |
150 |
2.3/8"~3.1/2" |
|
HYC |
200 |
3.1/2"~7.5/8" |
• The Elevators with API8C standard
• SJ series auxiliary elevators are mainly used in handling single casings and
tubings in oil drilling natural gas drilling and cementing operation
Model |
Rated Cap(ST) |
Size Range(in) |
|
"SJ"SERIES |
SJ |
5 |
2.3/8"~20 |
SJ |
6 |
21.1/2"~36" |
• The Elevators with API8C standard
• SP series auxiliary elevators are mainly used in handling single tubings,
casings and drill pipes with taper shoulder.
Model |
Rated Cap(ST) |
Size Range(in) |
|
"SP"SERIES |
SP |
5 |
2.3/8"~6.5/8" |