Home  >  Product Center  >  Handling & Power Tools  > Elevators
DDZ Elevators
TA Elevators
SX Elevators
SLX Elevators
Y type Elevators
SJ series auxiliary elevators
SP series auxiliary elevators
Product Introduction
DDZ series elevators are center latch elevators with 18 degree taper shoulder, applied in handling the drill pipes and drilling tools, etc. The loads range from 100 tons to 750 tons and the sizes range from 2-3/8” to 6-5/8”. The products shall be designed and manufactured according to the requirements in API SPEC 8C Specification for drilling and production hoisting equipments.
Product Details

The Elevators  with API8C standard
DDZ series elevators are center latch elevators with 18 degree taper shoulder,
applied in handling the drill pipes and drilling tools, etc
The loads range from 100 tons to 750 tons and the sizes range from 2-3/8” to 6-5/8”

 

Specifications

Model

Rated Cap(ST)

Size Range(in)

"G"SERIES

MG

100

2.3/8"~5"

RG

150

2.3/8"~5.1/2"

MGG

250

2.3/8"~5.1/2"

GG

350

3.1/2"~5.7/8"

HGG

500

3.1/2"~6.5/8"

HGG

750

4"~6.5/8"

Product Introduction
Model TA center latch elevators with square shoulder are suitable for handling drill pipe, drill collars, casing and tubings. The products shall be designed and manufactured according to API SPEC8C Specification for drilling and production hoisting equipments.
Product Details

The Elevators  with API8C standard
Model TA center latch elevators with square shoulder are suitable for handling drill pipe, drill collars, casing and tubings

 

Specifications

Model

Rated Cap(ST)

Size Range(in)

"A"SERIES

TA

35

1.05"~2.7/8"

65

1.66"~2.7/8"

100

2.3/8"~5"

125

2.3/8"~4.1/2"

150

4.1/2"~10.3/4"

Product Introduction
Model SX side door elevators with square shoulder are suitable for handling casings in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API SPEC8C Specification for drilling and production hoisting equipments.
Product Details

The Elevators  with API8C standard
Model SX side door elevators with square shoulder are suitable for handling casings in oil drilling, natural gas drilling and well construction

 

Specifications

Model

Rated Cap(ST)

Size Range(in)

"X"SERIES

SX

350-500

7"~20"

Product Introduction
Model SLX side door elevators with square shoulder are suitable for handling tubings, casings, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API SPEC 8C Specification for drilling and production hoisting equipments.
Product Details

The Elevators  with API8C standard
Model SLX side door elevators with square shoulder are suitable for handling tubings, casings, drill pipes and drill collars in oil drilling

 

Specifications

Model

Rated Cap(ST)

Size Range(in)

"X"SERIES

SLX

65

3.1/2"~14.1/4"

100

2.3/8"~5.3/4"

150

5.1/2"~13.5/8"

250

5.1/2"~30"

350

4.1/2"~14"

Product Introduction
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It’s especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment
Product Details

The Elevators  with API8C standard
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation

 

Specifications

Model

Rated Cap(ST)

Size Range(in)

"Y"SERIES

MYT

40

1.315"~2.7/8"

YT

75

1.315"~3.1/2"

YC

75

3.1/2"~7"

MYC

125

3.1/2"~7"

HYT

150

2.3/8"~3.1/2"

HYC

200

3.1/2"~7.5/8"

Product Introduction
SJ series auxiliary elevators are mainly used in handling single casings and tubings in oil drilling natural gas drilling and cementing operation. The products shall be designed and manufactured according to API SPEC8C Specification for drilling and production hoisting equipments.
Product Details

The Elevators  with API8C standard
SJ series auxiliary elevators are mainly used in handling single casings and
tubings in oil drilling natural gas drilling and cementing operation

 

Specifications

Model

Rated Cap(ST)

Size Range(in)

"SJ"SERIES

SJ

5

2.3/8"~20

SJ

6

21.1/2"~36"

Product Introduction
SP series auxiliary elevators are mainly used in handling single tubings, casings and drill pipes with taper shoulder. The products shall be designed and manufactured according to API SPEC8C Specification for drilling and production hoisting equipments.
Product Details

The Elevators  with API8C standard
SP series auxiliary elevators are mainly used in handling single tubings,
casings and drill pipes with taper shoulder.

 

Specifications

Model

Rated Cap(ST)

Size Range(in)

"SP"SERIES

SP

5

2.3/8"~6.5/8"